TFT LCD Display Module
Industrial HMI 2.25 Inch 76x284 TN TFT Bar Screen ST7789P3 4-SPI 600 Nits Control Panel
Rated for factory lighting, this TFT LCD Display Module delivers 600 nits across a 76x284 stripe for machine fascias and pump skids. The ST7789P3 platform tolerates long SPI ribbons inside a control cabinet.
1.14 Inch 135x240 IPS TFT LCD Display Module 13 Pin 400 Nits Compact Colour Display
Compact 135x240 IPS panel at about 240 ppi, this TFT LCD Display Module keeps small type legible in trackers and handheld meters. It comes with either a 13 pin solder tail or an 8 pin FPC, and runs at 400 nits on 3.3 V.
0.99 Inch 40x160 Narrow Strip IPS TFT LCD GC9001 4-SPI 10 Pin 400 Nits Pen Display
Only 8.6 mm wide, this TFT LCD Display Module carries 40x160 pixels for toothbrushes and smart pens. The GC9001 driver, a 400 nits edge lit backlight and a 10 pin solder tail fit a slim handle without a bulge.
Round 240x240 IPS TFT LCD Display Module 1.28 Inch GC9A01 4-SPI 12 Pin 350 Nits
With a 240x240 circular active area, this TFT LCD Display Module gives thermostats and audio knobs a dial that needs no corner masking. The GC9A01 driver, a 350 nits backlight and a 12 pin connection keep firmware and assembly simple.
Slim 2.25 Inch 76x284 TN TFT Bar Display ST7789P3 4-SPI 10 Pin 600 Nits Instrument Panel
Slim at 2.3 mm, this TFT LCD Display Module provides a 76x284 stripe with 600 nits for shelf edges and machine slots. Buyers choose a 10 pin 0.6 mm solder tail or an 8 pin FPC, both driven by the ST7789P3.
0.85 Inch Square 128x128 IPS TFT LCD GC9107 4-SPI 12 Pin 330 Nits Compact Badge Screen
A 128x128 square in a 1.5 mm body, this TFT LCD Display Module fits ring chargers and earbud cases. The GC9107 driver runs from 3.3 V over 4-SPI, with a choice of a 0.7 mm solder or a 0.5 mm FPC connection.
Portable 1.9 Inch 170x320 IPS TFT Touch Display ST7789P3 4-SPI 500 Nits Handheld Panel
Built for handheld use, this TFT LCD Display Module wakes on touch and holds 500 nits for field terminals and scanners. The bonded 170x320 IPS stack survives drop stress better than a frame mounted overlay.
POS Terminal 2.25 Inch 76x284 TN TFT Bar Display ST7789P3 4-SPI 600 Nits Cashier Screen
On a cashier pole, this TFT LCD Display Module shows item lines and totals at 600 nits under track lighting. Its 76x284 ratio fits a swivel housing, and the ST7789P3 keeps firmware common across a terminal family.
Smart Home 1.9 Inch 170x320 IPS TFT Touch Panel ST7789P3 4-SPI 500 Nits Wall Control Screen
For wall mounted control, this TFT LCD Display Module combines a 170x320 IPS panel with bonded touch and 500 nits. Thermostats and lighting keypads gain six large tap targets inside a 2.03 mm stack with the cover glass bonded directly.
0.96 Inch 80x160 IPS TFT LCD Display Module ST7735 4-SPI 8 Pin 400 Nits Full Colour
Featuring an 80x160 IPS cell and an ST7735 driver, this TFT LCD Display Module draws 20 mA at 3.3 V on a single LED, which suits fitness bands and pocket meters. The 8 pin 2.54 mm header lets a prototype run without a connector.
1.65 Inch 142x428 IPS TFT LCD Panel NV3007 4-SPI 13 Pin 350 Nits Slim Bar Display Module
Engineered with a 142x428 one to three ratio, this TFT LCD Display Module weighs 1.19 g and fits sport watches and cycling computers. An NV3007 controller, a 350 nits backlight and a 13 pin solder tail complete the module.
1.47 Inch 172x320 IPS TFT LCD Screen ST7789 4-SPI 12 Pin 600 Nits Wearable Display Module
Designed for narrow wearable housings, this TFT LCD Display Module offers 172x320 pixels at a 0.0337 mm subpixel pitch and 600 nits in the solder build. The same drawing is available as an 8 pin FPC version at 350 nits for indoor products.
1.3 Inch Square 240x240 IPS TFT LCD ST7789 4-SPI 12 Pin 350 Nits Symmetric Display Panel
Offering 260 pixels per inch on a 23.4 mm square, this TFT LCD Display Module suits control knobs and audio players. The ST7789 accepts four wire SPI or an 8 bit MCU bus, with a 12 pin solder or a 24 pin FPC tail.
1.9 Inch 170x320 IPS TFT Touch Screen ST7789P3 4-SPI 13 Pin 500 Nits Capacitive Panel
Bonding a 170x320 IPS cell to a projected capacitive sensor, this TFT LCD Display Module reporting touch over I2C while 500 nits keeps handheld terminals readable. The 2.03 mm stack removes the overlay gap and the dust trap it creates.
2.25 Inch 76x284 TN TFT LCD Bar Module ST7789P3 4-SPI 8 Pin 600 Nits Strip Display Panel
This TFT LCD Display Module pairs a 76x284 TN stripe with an ST7789P3 driver and a 600 nits backlight, so instrument fascias and shelf strips stay readable beside machine windows. An 8 pin 2.54 mm header removes the flex from low volume builds.
